Editors at IgMin Research

Shenzhen University

China

Composite materials & structures, structural retrofitting, and sustainable construction materials.

Dr. Biao HU is currently an Assistant Professor at the College of Civil and Transportation Engineering, Shenzhen University, P.R. China. He obtained his Ph.D. from the City University of Hong Kong in 2017. His main research focuses on composite ma...

Jeju National University

South Korea

Resistive Memory; Self Powered Electronics; Electronic Skin; Sensors; Biocompatible Electronics

Dr. Muhammad Muqeet Rehman is an accomplished researcher in Mechatronics Engineering, renowned for pioneering contributions to biomaterial-based electronic devices and neuromorphic engineering. Holding a Ph.D. from Jeju National University, South ...

Beihang University

China

Statistical quality control, reliability modelling, reliability statistics, accelerated test design and analysis, network reliability, transfer learning

Prof Jun Yang is now with the School of Reliability and Systems Engineering, Beihang University. His scientific interests include statistical quality control, reliability modelling, reliability statistics, accelerated test design and analysis, net...

Jiangsu University of Science and Technology

China

Design and manufacturing of pressure resistant structures for deep-sea submersibles

Zhang Jian is the vice president of School of Mechanical Engineering of Jiangsu University of science and technology, Professor with a double doctoral degree. Mr. Zhang has been devoted to researching deep-sea engineering equipment and got many ac...

Sun Yat-sen University

China

Impact engineering and safety protection, Design and optimization of mechanical metamaterials and dynamic response of structural materials

The researcher majors in impact engineering and safety protection, design and optimization of mechanical metamaterials and dynamic response of structural materials for a long time. Since 2016, the researcher has published papers on IJSS, AFM, JAM,...

Seoul National University

South Korea

Research interests lie at the intersection of biology, materials chemistry and engineering to broaden the multidisciplinary nature of materials. Interdisciplinary areas of focus cover the broader field of biomimetics as an important directive to u

Dr. Sonkaria holds a Ph.D. in Biochemistry from the University of London and is currently a Research Professor at Soft Foundry Institute (Engineering) at Seoul National University. With scientific experiences from India (Welcome Trust DBT Alliance...

Northwestern Polytechnical University

China

Design, fabrication, and characterization of high-performance alloy materials; modelling and simulation of tribological behaviour of metal composites

Qing Zhou is a full research fellow in the school of materials at Northwestern Polytechnical University, China. He was born in December 1988 and received his Ph.D. degree in material science and engineering from Xi’an Jiaotong University, Ch...

Polytechnic Institute of Coimbra

Portugal

Fault diagnosis, DC-DC Converters, Capacitors, Super capacitors, Batteries, Circuit Simulation and Machine Learning

Acácio M. R. Amaral received the E. E. diploma, the M. S. degree and the Ph. D degree from Coimbra’s University, Portugal in 1998, 2005 and 2010, respectively.Since 1998 has been with Coimbra’s Polytechnic, where is ...

Łukasiewicz Research Network - PORT Polish Center for Technology Development

Poland

Photonic devices, electronic devices, optoelectronics, thin films, chemistry, renewable energy, R&D research, radiation detector, LED, wearable electronics

Md Abdul Kuddus Sheikh is a researcher at “Photonic Materials and Structures” research group in Łukasiewicz Research Network – PORT. He received his Bachelor degree in Chemistry from University of Dhaka, Bangladesh and Masters l...

Tsinghua University

China

Sustainable development, green design, data-driven art research, ceramic design, ceramic art, art and technology, contemporary art criticism

I am an academic researcher based in China, specializing in the interdisciplinary study of art, design, and science. Over a decade, I pursued my education in the United States, the United Kingdom, and South Korea, where I engaged in extensive prac...

Federal University of São Francisco Valley

Brazil

Materials preparation and characterization; polymers; composites; electrospinning; 3D printing

Evando Santos Araujo is graduate at Degree in Mathematics from University of Pernambuco (2007). Has experience in Material and Metallurgical Engineering, focusing on Polymers, Applications, acting on the following subjects: polymers, condensed mat...

Tomsk Polytechnic University

Russia

The sphere of his research interests includes processing of metal allows, material science and thermal treatment of steel and alloys, technology of waste recovering and recycling.

In 1997 he was enrolled on a full-time course “Metallurgy of ferrous metals” at Tomsk Polytechnic University affiliate in the town of Yurga. In 2003 Denis V. Valuev defended his graduation thesis with distinction. By the decision of St...

Kumoh National Institute of Technology

Korea

Automotive/Railway systems, Control of automotive actuators and systems, application of smart materials (MR fluid and Shape Memory) in automotive actuators. 

Lamar University

USA

Microelectronics reliability modelling, Inverse dynamic problem, Structural dynamic modelling

Dr. Sushil Doranga has been serving as an assistant professor at Lamar University, Beaumont, Texas since September 2019. Before joining Lamar, Dr. Doranga worked as an advanced lead engineer with the transport intelligence division of General Elec...

Dalian University of Technology

China

1. High performance cement-based composites; 2. Recycling of industrial solid wastes.

Baoming Wang, male, born in 1972, professor, PhD, PhD supervisor, director of the Building Materials Institute at Dalian University of Technology, and deputy director of the National Experimental Teaching Demonstrating Centre of Civil and Hydrauli...

University of Chinese Academy of Sciences

China

Fabrication of micro-/nanostructured functional inorganic materials with well-defined structures as well as their application in catalysis, energy and sensing field

He received his BS degree from Hebei Normal University in 2005. He received his PhD degree from Beijing Institute of Technology (BIT) in 2010. After this, he went to National Center for Nanoscience and Technology (NCNST) in China for his postdocto...

International University of Rabat

Morocco

Energy Mix Modelling and Optimization, Climate Change, Energy Storage, Energy Dispatching, Smart Grids/Cities, Hydrogen, Water Management, Offshore Floating Photovoltaic, Onshore and Offshore Wind, Concentrated Solar Power, Utility-Scale Photovolt

Graduated in 2017 as an Energy Engineer from the School of Energy at the International University of Rabat (IUR), with an exchange program at the École Européenne d'Ingénieurs en Génie des Matériaux (EEIGM), the ...

Jilin University

China

Biomimetic composites, bioinspired functional structures, bionic interface engineering

Dr. Zhengzhi Mu currently works as an Associate Prof. of Jilin University. He received his PhD in Bionic Science and Engineering from Jilin University (China). He had studied as Research Scholar at the University of Michigan-Ann Arbor (USA) and Vi...

Universiti Teknologi MARA (UiTM) Shah Alam

Malaysia

Chemical Engineering, Polymer Engineering, Environmental Engineering; Bioprocess Engineering; Environmental Engineering; Chemical Reaction Engineering; Biotechnology; Oil Pollution Engineering

He completed his Masters in Biotechnology from the Faculty of Biotechnology & Agricultural, Universiti Sultan Zainal Abidin, in 2013. His areas of expertise include bioprocess engineering , environmental engineering, polymer, chemical reaction...

Dongguk University

South Korea

Fuel cells, soil fuel cell, brick type, bio fuels, single, double and triple chamber. Anodes cathodes, stacks

Dr. Verjesh Kumar Magotra currently works, as Assitant Professor at Nano Information Technology Academy (NITA) QSRC Dongguk University South Korea. He has done his post-doctorate for 2 years in the same dept before. Dr Magotra does his PhD at Dong...

Jimei university

China

Wireless communications, quantum communications, and applied physics

Guo-wei LEI received the B.S., M.S. and Ph.D degree from Gannan Normal University, Xiamen University, Beijing University of Posts and Telecommunications in 1999, 2004, 2019 respectively. He is with the school of science at Jimei University in Chin...

Federal University of Rio Grande do Sul

Brazil

Recycling, construction waste, emerging pollutants, mineral characterization, flotation, metallic minerals, coal and industrial minerals, recovery of degraded areas in mining and the environment.

Graduated in Mining Engineering from the Federal University of Rio Grande do Sul (1990), master's degree in Mining Engineering from the Federal University of Rio Grande do Sul (1993), specialization in Environmental Management and Environmental Te...

Institute of Corrosion Science and Technology

China

My research interest is on the structural integrity and protection of several industrial materials, such as, stainless steels, low alloy steel, zirconium, titanium and nickel-based alloys. My research also focuses on electroplating of metallic/bim

Bright O. Okonkwo is, at present, an Associate Researcher at Institute of Corrosion Science and Technology, Guangzhou, China. He carried out his Postdoctoral research work at Korea Advanced Institute of Science and Technology, Daejeon, South Korea...

Sumy State University

Ukraine

The methods development of sealing theory and vibration reliability of centrifugal machines.

Serhii Shevchenko was born in 1961, graduated from the Kharkiv Polytechnic Institute (KhPI) in 1984 (specialty: "Hydraulic machines and means of automation"). In 1990, he defended his Ph. D thesis on the topic "Development and research of ...

Shenzhen University

China

Self-healing concrete；Modelling and experiments on concrete materials and structures；Quality control of reinforced concrete structure construction；Durability of reinforced concrete structures；Analysis of heterogeneous materials.

Professor Dr. Wang, Xianfeng is a distinguished Professor and Doctoral Advisor with exceptional accomplishments in the field of civil engineering materials and structural engineering. He is currently the Director of Structural Laboratory and Head ...

Dhofar University

Oman

Sustainable Urban Development, Smart Cities, and Building Technologies.

Abbas M. Hassan, Ph.D. is currently Assistant Professor acting a chairperson of Architectural Engineering Department at Dhofar University in Sultanate of Oman. Dr. Abbas is Associate professor at Al-Azhar University in Egypt. His work is c...

Federation University

Australia

Rock Mechanics, Mining Sustainability, Rock Blasting, Environmental Geotechnology, Slope Stability, etc.

Dr Manoj Khandelwal is an Associate Professor and Program Coordinator (UG and PG) of mining engineering at Federation University Australia and is an Australian Endeavour Fellow. Dr Khandelwal has completed his bachelor's degree in mining engineeri...

University of Coimbra

Portugal

Numerical Simulation of Forming Processes and Nanotubes, Uncertainty Analysis, Parameter Identification and Machine Learning

André Pereira completed his Master's degree in Mechanical Engineering at the University of Coimbra (UC) in 2014. In the same year, he started his research activity under a FCT project, associated with the numerical modelling of nanotubes, o...

University of Tasmania

Australia

Mining Engineering, Mineral Processing, Environmental Geology.

PhD graduated in Mining Engineering- Mineral Processing (Precious and REEs) at Amirkabir University of Technology, Iran, 2017. A Process Engineer who conducted several projects in private companies (Copper and Alumina processing). ...

Shandong University

China

Glassy alloy, computation science in materials, electrochemistry in metals.

Weimin Wang, Born on Feb. 23, 1970, professor of college of materials science and engineering and Key Laboratory of Liquid-Solid Structural Evolution and Processing of Materials, Shandong University, Jinan 250061, China. His research interests inc...

Jimei university

China

Energy Materials, Energy Storage, Energy conversion.

Qi-Hui Wu obtained PhD degree in 2003 from Darmstadt University of Technology, Germany, after that he did postdoctoral researches at Georgia Institute of Technology and Ruhr Bochum University, respectively. In 2005, he joined Xiamen Universit...

Delhi Pharmaceutical Sciences and Research University

India

Nanotechnology in Drug delivery, Vaccine delivery, Nanodiagnostics, Biomedical Science, Nanobiotechnolgy, Nanomaterials and Cancer therapy (Si RNA), Nanofibers, Exosomes, Nanotoxicology, Intracellular Trafficking of nanoparticles, Microneedles, De

Dr. Gugulothu, is presently working as Assistant Professor, Delhi Pharmaceutical Sciences and Research University, New Delhi India, He was completed Ph. D (Tech) (2014), and M. Pharmacy (2008) from Institute of Chemical Technology (ICT) Mumbai, In...

Wuhan Institute of Technology

China

Water splitting; CO2 electroreduction; nanocatalysis; synthesis of inorganic materials.

Dr. Duan Junyuan, a postgraduate supervisor, was selected for the fifth-level Excellent Talent Plan at Wuhan Institute of Technology and the Hubei Province Postdoctoral Excellent Talent Tracking Support Plan. From September 2009 to June 2013, he p...

University of Nebraska–Lincoln

Argentina

Pyrolysis, biomass, biorefinery, petroleum, petrochemistry, catalysts, cannabis, wastes, catalytic cracking

The researcher works on catalytic applications and development of new processes for the valorization of residual biomass, with emphasis on the production of fuels and raw materials for the chemical industry. Its main lines of work are the pyrolysi...

University of Minho

Portugal

Organic synthesis, Heterocyclic chemistry, Polymer chemistry, Materials, Graphene, Fibers.

Elina Margarida Ribeiro Marinho is a researcher at the Centre for Textile Science and Technology (2C2T) at the University of Minho. She holds a degree in Chemistry (2007), a Master's degree in Medicinal Chemistry (2009), and a PhD in Organic Chemi...